NC-544
5.25" Low-power 6x86 Little
SBC
|
Click on image for a larger picture
(Image for illustration purposes only)
|
Overview:
- On-board Low-power CPU (NS Geode GX1 @ 300 MHz)
- Supports multimedia VGA/LCD/Sound and network
functions
- Onboard 10/100 Base-TX Ethernet interface
- One SODIMM Socket
- 5.25" Embedded Form Factor
Specifications: (Note:
Specifications are subject to change at any time without notice.)
| CPU |
Built-in 6x86 NS Geode 300 Mhz CPU |
|
| Chipset |
VIA VT8606 (PN133T Twister-T) & VT82C686A/B
|
|
| Cache |
128K L1 Cache & 64K L2 Cache built into CPU
|
|
|
| Memory: |
|
|
| DRAM |
1 x 144-pin SO-DIMM socket supports up to 128MB
SDRAM and low-profile applications |
|
| BIOS |
Award/AMI BIOS, 128KB (Flash) EPROM |
|
| Watchdog Timer |
Programmable 0 ~ 1024sec |
|
| CMOS Backup |
Backup by Li battery |
|
|
|
| Video: |
|
|
| General |
SMA 64-bit TFT LCD/CRT,supports CRT and 18-bit
TFT
LCD flat panel up to 1280x1024x8 BPP and 1024x768x16 BPP, supports
MPEG1 and MPEG2 assist, 44-pin LCD connector. Optional DSTN daughter
board |
|
|
| Storage |
|
|
| FDD |
FDD port x 1:Up to 2 devices - 3.5" or 5.25"
FDD or LS120 |
|
| HDD |
ATA100/66/33 IDE Port x 2: Up to 4 IDE devices
|
|
| CompactFlash
I/II |
Optional CF-2 socket for IDE Flash Disk or IBM
1.8" MicroDrive 340MB/1GB HDD |
|
|
| I/O: |
|
|
| Serial |
Serial Port x 4: RS-232 x 3+ RS-232/422/485 x
1 |
|
| Parallel
Port |
Bi-directional SPP/EPP/ECP port |
|
| Mouse/Keyboard |
8-pin header |
|
| Bus
Type |
PC/104 socket, PCI slot x 1 |
|
| LAN |
10/100vMbps Ethernet |
|
| Speaker
|
Buzzer on Board |
|
| Audio |
16-bit stereo FM synthesis, OPL3 emulation |
|
| USB |
USB pin header on board |
|
| IrDA |
IrDA pin header on board |
|
|
| Mechanical |
|
|
| Power |
+/-5V, +/-12V power by using ATX connector; or,
single +5V
by 2-pin connector with optional hi-current +12V for LCD inverter
|
|
| Dimensions |
203 X 146mm |
|
| Temperature
|
0°C ~ 60°C |
|
|
